Pneumatic control valves are precision “switch” in industrial automation. Correct debugging is related to the efficiency of the system. Mastering the correct debugging methods and steps of pneumatic control valves can ensure their normal operation and achieve precise control of the medium. The following are the key debugging steps and precautions for pneumatic control valves： I. Inspection…

I.Product overview Compressed air purifier, as an innovative product of air purification in the industrial field, is based on the use of advanced catalytic oxidation technology. This technology breaks through the limitations of traditional air purification methods and achieves immunity to environmental factors(e.g., air quality, pressure, temperature and humidity). At the same time, it eliminates…

The failure of the pneumatic control valve to meet the flow standard may be caused by a variety of reasons. The following are some common reasons and their analysis: I. Insufficient gas supply pressure: Pneumatic control valves require a certain air source pressure to work properly. If the air supply pressure is insufficient, it will directly…

The selection method and basis of electric control valve are important links to ensure that the valves can accurately and reliable meet specific process requirements and operating conditions. The following provides a detailed explanation of the selection method and selection criteria for electric control valves: I. Selection methods 1. Clarify requirements and working condition analysis. Understand the…

There are significant differences between stainless steel pneumatic fittings 304 and 316 in many aspects. These differences are mainly due to their chemical compositions, physical properties and applicable environment. The following is a detail analysis of the differences between the two: I. Chemical composition 304 stainless steel: It mainly contains 18% chromium and 8% nickel, which…

The treatment methods for solenoid directional valve noise mainly include the following aspects: I. Check the quality and installation of solenoid. Problem analysis: The quality of the solenoid itself, such as improper coil processing, defects in the iron core or improper installation, may lead to noise generation. Solution: Check the quality of the solenoid to ensure…

As an indispensable key component, pneumatic actuators are everywhere in the field of industrial automation. So, how do pneumatic actuators work? What are the key parts of its basic structure? The working principle and basic structure of pneumatic actuator are as follows: I. Working principle Pneumatic actuators use compressed air to convert pressure energy into mechanical…

Under different medium, the selection parameters of the booster valves will indeed be different. This is mainly because different medium have different physical and chemical properties, which put forward different requirements on the material, structures, performance and other aspects of the booster valves. Here are some of the main differences: I. Material selection. Corrosive medium: For…

The pressure regulator on air compressor is a critical control device that monitors and regulates the pressure of the compressed air produced by the air compressor to ensure that the output pressure remains stable within a preset range. This regulator typically contains a pressure changes of the compressed air and converts these changes into electrical…

Air compression post-processing is a key process to ensure the quality and purity of compressed air. it is mainly through a series of equipment for air compression cooling, remove water, filter, dry and other treatments. The following are the main equipment and functions of air compression post-processing, as well as the importance of air compression…